Aqua Marina LAXO Guía De Usuario página 9

C
SEAT INSTALLATION
1. Attach the seat to the kayak floor with Velcro. It is important to place the seat in the
right place to evenly balance the boat when in the water. A solo paddler should be
slightly aft of the boat's center. With two paddlers, the heavier one should sit toward
the rear.
2. Once seat position is confirmed, connect the seat straps to the D-rings by using seat
strap buckles. Attach the upper straps to the D-rings forward of each seat.
NOTE: Seat position could be easily adjusted by clipping strap buckles to different
D-rings, and strap buckles may be clipped to the same D-ring if needed.
9