Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Tools required for installation
Screw driver (pozidrive n°2 , torx 10 and 20)
Allen spanner 4mm
Shifting spanner 10mm
pipe wrench
/
3
8
Electric drill with twist bit Ø 10 mm
Figure 2
Figure 3
Figure 4
Figure 5
Pre-Installations Calculations (see Figure 2)
1. a) Select a hood preference height P (see Figure 2) that is comfortable for
the user not less than 30”.
b) Calculate Hood height your installation H (see Figure 2). H = K-C-P.
c) Confirm that H is within the range of min to max H found for your hood.
If not adjust your installation.
d) Calculate Chimney structure height S (use formulas in Figure 2, and
check dimensions of your hood). Save this calculation for use later in the
installation.
Preparation of Mounting Surface - Installing supports above
ceiling drywall.
Note: Take into consideration the hood depth; your hood could be much
deeper than the cooktop.
5
Publicidad
Tabla de contenido
