Installation - Himsa NOAHlink Manual Del Usuario

NOAHlink Users Manual
1. Select one of the following options:
a. Use the Ezurio Bluetooth device supplied with NOAHlink:
b. Use an ALREADY installed Bluetooth device other than
the Ezurio device supplied with NOAHlink:
2. Place a rechargeable/alkaline battery in NOAHlink. Refer to
Chapter 6 for further details. (NOTE: If you are using a
rechargeable battery, you will first need to charge it.)
3. Remove NOAHlink from its charger cradle (if you have placed it
there while charging the battery).
4. Place your NOAHlink unit not more than five meters from your
PC to ensure adequate wireless communication.
5. Turn on your NOAHlink. Turn on your PC.
6. An installation CD is provided with NOAHlink. Put this into your
disk drive. If the program does not begin running straightaway, use
Windows Explorer to locate the Installation folder and double-
click on Setup.exe.
7. Select your setup language and click Next.
8. After preparation completes, click Next.
9. The Install Shield Wizard Complete window appears. Click
Finish.
10. Follow the guidelines on the screen and plug your Bluetooth
device into your PC. Position the Bluetooth device at PC height,
and vertically, to ensure optimum performance.
11. The Found New Hardware Wizard may appear. If so, click Next
to install the software automatically.
14
 Do NOT attach the Ezurio device until advised to in the
following steps.
 In the following steps, use your own Bluetooth device
instead of Ezurio.

5 Installation