Advanced Applications; Displaying Errors In Noahlink And Bluetooth - Himsa NOAHlink Manual Del Usuario

NOAHlink Users Manual

8.2 Advanced Applications

8.2.1 Displaying Errors in NOAHlink and Bluetooth

The Diagnostic tab displays errors found in tests on Bluetooth and
NOAHlink to check response and other capabilities.
This tab displays the user-defined name of your NOAHlink, the
NOAHlink serial number (printed at the back of the unit) and the
Bluetooth device address (or COM port).
The Event log is listed as „OK‟ or „Error‟.
NOTE: If any errors are listed, these may help your support
The following table describes how to use the Diagnostic tab:
COMMAND
Details
28
Figure 9: The Diagnostic tab
representative to troubleshoot problems.
USE
List errors if
Event log
displays „Error‟
PROCEDURE
 Click Details to list errors in
NOAHlink and Bluetooth tests