NOAHlink Users Manual
This section describes the NOAHlink specifications.
B.1 NOAHlink Unit
B.1.1
Battery Types:
Low Battery
Indicator Level:
Estimated
Battery Life:
B.1.2
Size:
Net Weight:
B.1.3
The NOAHlink unit complies with the following standards:
To comply with these standards, the programming cable and the
connector to the hearing instrument must meet the following
requirements:
36
B Technical Specifications
Battery
Rechargeable (Ni-MH type) AA (R6)
NOTE: Use only rechargeable batteries supplied
Alkaline AA (R6) 1.5V
When approximately 45 minutes of battery
operating time remain
Approximately 20 fittings (each of 45 minutes
duration)
Dimensions and Weight
91mm x 100mm x 31mm (L x W x H)
115g (excluding battery)
Approx. 141g including battery
Patient Safety
EN 60601-1, Internal powered, Type BF, IPXO
UL2601-1 and CAN/CSA-C22.2 NO 601.1-90
No conductive parts may be accessible when the
programming cable is connected to NOAHlink
The programming cable and the connector must provide
double isolation and be able to withstand a dielectric
strength test potential of 500 V.
by HIMSA.