FUNCTIONAL OVERVIEW
Display
Stays on when repeat
title function is on.
Stays on when
the repeat function is on.
Stays on when
the A-B repeat
function is on.
Stays on when the inserted
disc is being played back.
Displays During Operation
Power on
No disc inserted
Tray open
Tray closed
Loading the Disc
Power off
Using the remote control
Keep in mind the following when using the remote
control:
• Make sure that there is no obstacle between the
remote and the remote sensor on the unit.
• Use within the operating range and angle, as shown.
Lights up when a
Lights up when the
playback control
inserted disc comes
is activated.
to a pause.
Loading the Batteries
1. Open the battery compartment cover.
2. Insert two "AA" (R6P) batteries, with each
3. Close the cover.
NOTES
• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.
Cautions On Batteries
• Use "AA" (R6P) batteries in this remote control unit.
• Replace the batteries with new ones approximately
once a year, though this depends on the frequency
with which the remote control unit is used.
• If the remote control unit does not operate from
close to the main unit, replace the batteries with
new ones, even if less then a year has passed.
• The included battery is only for verifying operation.
Replace it with a new battery as soon as possible.
• When inserting the batteries, be careful to do so in
the proper direction, following the
in the remote control unit's battery compartment.
• To prevent damage or battery fluid leakage:
• Do not use a new battery with an old one.
• Do not use two different types of batteries.
• Do not short-circuit, disassemble, heat or dispose
of batteries in flames.
• Remove the batteries when not planning to use the
remote control unit for a long period of time.
• If the batteries should leak, carefully wipe off the
fluid from the inside of the battery compartment,
then insert new batteries.
– 11 –
Stays on when repeat chapter function is on.
Stays on when repeat track function is on.
Lights up when a DVD is
inserted into the tray.
CD:
Lights up when a CD is inserted
into the tray. (The SUPER AUDIO CD
Indicator also lights up when playing a
Super Audio CD.)
VCD:
Lights up when a Video CD is
inserted into the tray.
Displays how long a current title or track has been
played back. When a chapter or track has switched,
the number of a new title, chapter or track is displayed.
one oriented correctly.
and
marks
EN