Subtitle Language; Camera Angle; Changing The On-Screen Display - Marantz DV6400 Manual Del Usuario

PLAYING A DISC
STEREO
L-CH
R-CH
NOTES:
• If the Virtual Surround setting is ON, the sound mode will
be fixed to STEREO, and can not be changed.
• Stereo sound mode will not be changed when playing DTS CD.

Subtitle Language

The DVD player allows you to select
a language for subtitle during DVD disc (if available) playback.
1 Press the SUBTITLE button during playback.
2 Press the SUBTITLE button repeatedly to select
your desired subtitle language.
• The selected language will be displayed on the display
bar at the top of the screen.
3
To turn off subtitles, press the SUBTITLE button
repeatedly until OFF appears.
1.ENG/6
2.FRE/6
OFF
NOTES:
• Some discs allow audio language setting/subtitle language
setting on the disc menu. (Operation varies between discs,
so refer to the manual accompanying the disc.)
• If the desired language is not shown after pressing the
SUBTITLE button several times, the disc does not have subtitles
in that language.
• If you choose a Language that has a 3-letter language
code, the code will be displayed every time you change the
Subtitle language setting. If you choose any other lan-
guages, '---' will be displayed instead. (Refer to page 28.)
Both right and left channels
are active (stereo).
Only the left channel
is active.
Only the right channel
is active.
DVD-V
Subtitle 1
Subtitle 2
OFF
– 23 –

Camera Angle

Some DVD discs contain scenes which have been shot simulta-
neously from various angles. You can change the camera angle
when the ( ) mark appears on the screen.
1
Press the ANGLE button during playback.
• The selected angle will be displayed on the display bar
at the top of the screen.
2
Press the ANGLE button repeatedly to select your
desired angle.
1 / 8
2 / 8
8 / 8

Changing the On-Screen Display

You can check information about the current disc by pressing
the DISPLAY button on the remote control.
1
Press the DISPLAY button during
playback to show current Chapter.
• The elapsed and remaining play-
ing time of the current chapter
will be displayed.
2 Press the DISPLAY button again
to show current Title.
• The elapsed and remaining playing time of the current
title will be displayed.
3 Press the DISPLAY button the
third time.
• The BIT RATE and the current
repeat setting will be displayed.
• If you are playing a dual layered
disc, the layer number will also
be displayed ( L0: Layer 0 is playing. L1: Layer 1 is
playing).
4
Press the DISPLAY button the fourth time to remove
the display.
1 Press the DISPLAY button during playback, the
current Track will be displayed on the TV screen.
• The elapsed and remaining playing time of the current
track will be displayed.
2 Press the DISPLAY button again to show the Total Tracks.
• The elapsed and remaining playing time of the disc will
be displayed.
3
Press the DISPLAY button for the third time to
remove the display.
DVD-V
Angle 1
Angle 2
Angle 8
DVD-V
9/49 0:00:00 -0:00:00
IIII
T
SUPER
CD VCD
AUDIO CD
EN