1. Unpacking Your Fan.
Carefully open the packaging. Remove items
from Styrofoam inserts. Remove motor housing
and place on carpet or Styrofoam to avoid
damage to finish. Do not discard fan carton or
Styrofoam inserts should this fan need to be
returned for repairs.
Check against parts inventory that all parts have
been included.
2. Parts Inventory.
b. hanging bracket (pre-attached to canopy).
c. downrod (with pin and clip) and hanging ball.
f. remote control receiver. 1 piece
i. remote control cover. 1 piece
k. light kit fitter. (pre-attached to motor housing).
IMPORTANT REMINDER: You must
use the parts provided with this fan for
proper installation and safety.
a. canopy. 1 piece
1 piece
1 piece
d. yoke cover. 1 piece
e. motor housing. 1 piece
g. wall control. 2 pieces
h. plate.1 piece
j. faceplate. 3 pieces
1 piece
l. glass shade. 1 piece
m. blade. 4 pieces
n. hardware packs
a
e
k
m
n
1 x 50 watt max. halogen bulb, type JD E11
page 2
c
b
f
h
i
l
w/ wall
control
bulb required:
(included)
d
g
-
1 1
ON/ DIM
OFF
j
w/ remote