Bissell POWERFRESH 2181 Serie Guia Del Usuario página 12

Setting Up The Wall Mount
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
A Phillips Head Screwdriver is needed to install the wall mount. If
installing onto drywall, use plastic anchors with provided screws.
1
2
Place each screw through the two holes
in the wall mount. Use a screwdriver or
drill to affix to the wall.
12
www.BISSELL.com
Place the wall mount against the wall in the area where
you've determined you would like to store your machine.
3
Find the clip on the
back of the Tool
Box and hook it into
the right side of the
Wall Mount.