Voltage Selector; Connecting The Power Cable - Yamaha CD-S1000 Manual De Instrucciones

■ VOLTAGE SELECTOR

(Asia and General models only)
Caution
The VOLTAGE SELECTOR on the rear panel of this unit
must be set for your local voltage BEFORE plugging the
power cable into the AC wall outlet. Improper setting of
the VOLTAGE SELECTOR may cause damage to this
unit and create a potential fire hazard.
Rotate the VOLTAGE SELECTOR clockwise or
counterclockwise to the correct position using a straight
slot screwdriver.
Voltages are as follows:
........................AC 110/120/220/230–240 V, 50/60 Hz
230-
240V
VOLTAGE
SELECTOR
(Asia and General models)
VOLTAGE
SELECTOR
AC IN
Voltage indication

■ Connecting the power cable

Connect the power cable into the AC IN inlet on the rear
panel when all connections are complete, and then plug in
the power cable to the AC outlet.
15
En