Adjusting The Looper Thread Trimmer Mechanism; Adjusting The Thread Trimmer Air Cylinder (Ut45); Adjusting The Looper Thread Trimmer Solenoid (Ut42) - JUKI MF-7200 D Serie Manual De Instrucciones

^. ADJUSTING THE LOOPER THREAD TRIMMER MECHANISM
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest. In addition, cut the air
supply from air compressor.(UT45)
1. Adjusting the thread trimmer air cylinder (UT45)
2
1
18 mm
2. Adjusting the looper thread trimmer solenoid (UT42)
3
18 mm
1
3
2
– 12 –
1) Stroke of ar cylnder 3 s 18 mm.
When adjustng the stroke, loosen setscrew 2 of
collar 1 and move collar 1 to the rght or left to ad-
just.
1) Stroke of looper thread trmmer solenod 3 s 18
mm. When adjustng the stroke, loosen setscrew 2
of collar 1 and move collar 1 to the rght or left to
adjust.