Troubleshooting - Black and Decker SM1610 Manual De Instrucciones

Recommended accessories for use with your appliance are available from your local
dealer or authorized service center. If you need assistance regarding accessories, please
call: 1-800-544-6986.
appliance could be hazardous.
WARNING:
• Unit will not start.
PROBLEM
• Mop will not make steam. • No water in water tank.
• Mop leaves water on floor. • Cleaning pad is too wet. • Unplug unit from power outlet
• Mop left spot on floor.
For assistance with your product, visit our website www.blackanddecker.com for the
location of the service center nearest you or call the BLACK & DECKER help line at
1-800-544-6986.
ACCESSORIES
The use of any accessory not recommended for use with this

TROUBLESHOOTING

• Cord not plugged in.
POSSIBLE CAUSE
• Circuit fuse is blown.
• Circuit breaker is tripped. • Reset circuit breaker. (If the
• Cord or switch is
damaged.
• Water tank cap is not
screwed on correctly.
• Mop left in one spot too
long.
• Hard water.
• Plug appliance into a working
POSSIBLE SOLUTION
outlet.
• Replace circuit fuse. (If the
product repeatedly causes the
circuit fuse to blow, discontinue
use immediately and have it
serviced at a Black & Decker
service center or authorized
servicer.)
product repeatedly causes the
circuit breaker to trip,
discontinue use immediately
and have it serviced at a Black &
Decker service center or
authorized servicer.)
• Have cord or switch replaced
at a Black & Decker Service
Center or Authorized Servicer.
• Add water to the water tank.
• Please ensure the filler cap is
screwed on straight and tight in
order to ensure the tank receives
the necessary pressure to
produce steam.
and change the micro-fiber
cleaning pad.
• Never leave the steam mop on
the floor with a damp or wet
cleaning pad still attached when
not in use.
• Use distilled water.
9