Phcbi MCO-230AIC Instrucciones De Operación página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

CAUTION
This unit must be plugged into a dedicated circuit protected by branch circuit breaker.
Use a dedicated power source as indicated on the rating label attached to the unit. A multiple-tap may
cause fire resulting from abnormal heating.
Never store corrosive substances such as acid or alkali in this unit if the container cannot be
sealed. These may cause corrosion of inner components or electric parts.
Check the setting when starting up of operation after power failure or turning off of power
switch. The stored items may be damaged due to the change of setting.
Be careful not to tip over the unit during movement to prevent damage or injury.
Prepare a safety check sheet (copy the last page) when you request any repair or maintenance for
the safety of service personnel.
Wear rubber gloves when handling the H
O
reagent. Direct contact with the H
O
reagent may
2
2
2
2
result in inflammation of the skin.
H
O
decontamination can be performed only for the chamber and chamber attachments with standard
2
2
specifications, and not for any other objects.
Perform H
O
decontamination with the chamber attachments arranged as specified by our
2
2
company. Arranging them in a different way may result in insufficient decontamination.
After H
O
decontamination has been completed, wear rubber gloves and use a non-woven cloth to
2
2
wipe off the residual H
O
fluid from the bottom of the chamber, any objects that were
2
2
decontaminated, and the bottoms of ducts.
Do not climb on top of the incubator or place any object on it. By doing so you may damage the
incubator or knock it over, which may result in injury.
Wear rubber gloves when performing maintenance on the chamber. Failure to wear gloves may
result in cuts or abrasions from sharp edges or corners.
9

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Mco-230aicuv

Tabla de contenido