Resetting The Unit - Yamaha TSX-B72 Manual De Instrucciones

Ocultar thumbs Ver también para TSX-B72:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TROUBLESHOOTING
Bluetooth
Problem
Cannot make this unit
paired with the other
component.
Cannot establish a
Bluetooth connection.
No sound is produced or
the sound is interrupted
during playback.
USB port charging
Problem
Cannot charge the
connected portable USB
device.

■ Resetting the unit

If the unit does not function properly, resetting the unit may solve the problem. To reset the unit, press and hold
for more than 10 seconds.
14
En
Cause
The other component does not support
A2DP.
A Bluetooth adaptor, etc. that you want to
pair with this unit has a password other
than "0000".
This unit and the other component are too
far apart.
There is a device (microwave oven,
wireless LAN, etc.) that outputs signals in
the 2.4 GHz frequency band nearby.
This unit is not registered on the other
component's Bluetooth connection list.
The Bluetooth connection of this unit with
the other component is disconnected.
This unit and the other component are too
far apart.
There is a device (microwave oven,
wireless LAN, etc.) that outputs signals in
the 2.4 GHz frequency band nearby.
The other component's Bluetooth
function is off.
The other component is not set to send
Bluetooth audio signals to this unit.
The pairing setting of the other
component is not set to this unit.
The other component's volume is set to
the minimum.
Cause
An incompatible USB device is connected
to the unit. Or the USB device is not
connected to this unit properly.
Solution
Perform pairing operations with a component
which supports A2DP.
Use a Bluetooth adaptor, etc. whose password
is "0000".
Move the other component closer to this unit.
Move this unit away from the device that is
emitting radio-frequency signals.
Perform pairing operations again (☞ P. 10).
Perform Bluetooth connection operations
again (☞ P. 12).
Move the other component closer to this unit.
Move this unit away from the device that is
emitting radio-frequency signals.
Turn on the Bluetooth function of the other
component.
Check that the Bluetooth function of the other
component is set properly.
Set the pairing setting of the other component
to this unit.
Increase the volume level.
Solution
Turn off the system and reconnect the USB
device to the unit. If it does not resolve the
problem, the USB device is not chargeable
with the unit.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido