Setting The Alarm Time With The Unit - Yamaha MusicCast ISX-80 Manual De Instrucciones

Setting the alarm time
with the unit
1
Press and hold .
•
and set alarm time will flash.
2
Press / to set the alarm time.
3
(when alarm types other than BEEP are
selected) Press either
select music source.
• Depending on the circumstances of the source
selected at the alarm time, sound may not be
output.
Continue to the next page\
3
3
or to
• The alarm setting will be erased if the system
enters standby mode without properly
completing it.
• Set the alarm type by using "MusicCast
CONTROLLER."
• You can use buttons on the unit to set the alarm.
1
Press and hold ALARM.
1 2
Press VOLUME -/+ to set the alarm time.
3
(When selecting an alarm type other than BEEP)
Press either of the SOURCE buttons to select
2
the source to play back.
4
(When selecting an alarm type other than BEEP)
Use PRESET to specify the song/radio station
to play back.
- Pressing the button once will resume the
content.
- To specify the track or ratio station to play back,
press the button repeatedly until the specified
preset number is displayed.
5
Press ALARM to finish the alarm setting.
Using the alarm function
31
En