Metrohm 794 Basic Titrino Instrucciones Para El Uso página 121

794 Basic Titrino
C24.Value: Value
C24.Unit: Unit of the assigned value
C26.ActN: Number of single results
C26.Mean: Mean (decimal places as for the result itself)
C26.Std: Standard deviation (decimal places as for the result + 1)
C26.RelStd: Relative standard deviation (in %, 2 decimal places)
3.2.2.75. Info.ActualInfo.Inputs.Status
Info.ActualInfo.Inputs.Change
Info.ActualInfo.Inputs.Clear
Info.ActualInfo.Outputs.Status
Info.ActualInfo.Outputs.Change
Info.ActualInfo.Outputs.Clear
Status sends the current status of the I/O lines, Change sends the information
regarding whether a change in status of a line has taken place since the last
clearing, Clear clears the change information. For the output, there is a con-
version from binary to decimal, e.g.
| 0 | 0 | 0 | 0 | 1 | 0 | 1 | 0 |
Line No.
| 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
Output: 2 1 + 2 3 = "10"
1 means ON or change; 0 means OFF or no change.
The lines are assigned as follows (see also pages 161ff):
Inputs:
0 Start (pin 21)
1 Stop (pin 9)
2 Enter (pin 22)
3 Clear (pin 10)
4 Smpl Ready (pin 23)
5 pin 11
6 pin 24
7 pin 12
3.2.2.76. Info.ActualInfo.Assembly.CyclNo
$Q sends the current cycle number of the voltage measurement cycle, e.g.
"127". From the cycle number and the cycle time (see 3.2.2.82), a time frame
can be set up.
The cycle number is set to 0 on switching on the instrument, on every start
and for QuickMeas. It is incremented as long as the instrument remains
switched on.
3.2.2.77. Info.ActualInfo.Assembly.Counter.V
Info.ActualInfo.Assembly.Counter.Clear
$Q sends the volume. With the function &Info.Assembly.Counter.Clear $G, the
volume counter is set to zero.
3.2.2.78. Info.ActualInfo.Assembly.Meas
$Q sends the current measured value from the assembly.
3.2 Remote control commands
Outputs:
0 Ready (pin 5)
1 Cond. ok (pin 18)
2 Titration (pin 4)
3 EOD (pin 17)
4 L4 in TIP (pin 3)
5 Error (pin 16)
6 Activate, L6 in TIP (pin 1)
7 Pulse for recorder (pin 2)
"2.222"
"%"
"3"
"3.421"
"0.0231"
"0.14"
read only
read only
$G
read only
read only
$G
read only
read only
$G
read only
117