Connecting The Underwater Flash - Olympus PT-EP12 Manual De Instrucciones

4. Connecting the underwater flash

To connect the underwater flash (optional) to the Case using an underwater optical fiber cable (optional:
PTCB-E02), follow the procedures below.
Connecting the underwater optical fiber
cable
1 Put the underwater optical fiber cable plug into
the optical fiber cable insertion slot.
Insert firmly until it stops next to the flash window
cover.
2 Put the cap to the optical fiber cable insertion slot
when not in use.
EN
Setting of the digital camera
Set the RC mode of the camera to ON so that the camera's built-in flash is activated.
In the case of flash with the RC mode, turn the RC mode to ON.
For details, refer to the instruction manual of the flash.
In case of UFL-1, plug the optical fiber cable in the same way.
Turn the RC mode of the camera to OFF.
EN 17