Measuring Area; Measuring Volume - Craftsman CMHT77639 Manual Del Usuario

Measuring Area

You can measure the area of a wall, floor, or object.
1.
Point the tool's laser (Figure
or object, and not toward anyone's eyes.
2.
Press (Figure
A 3
display the red laser dot.
3.
FUNCT.
Press to show
UNITS
(Figure .
F 4
4.
Measure the width.
• Point the top of the tool at one side of the target
(wall, floor, or object).
• Position the bottom of the tool at one end of the
target and point the laser dot across the width
(Figure ).
G 1
• Press to display the width measurement at the
top of the display window.
5.
Measure the length.
• Position the bottom of the tool at one end of the
target and point the laser dot across the length
(Figure ).
G 2
• Press to display the length measurement on
the second line of the display window.
6.
View the Area measurement at the bottom of the
display window (Figure

Measuring Volume

You can measure the volume of a room or object.
1.
Point the tool's laser (Figure
or object, and not toward anyone's eyes.
2.
Press (Figure
A 3
display the red laser dot.
3.
FUNCT.
Press twice to show
UNITS
window (Figure
F 4
4.
Measure the width.
• Point the top of the tool at one side of the target
(room or object).
• Position the bottom of the tool at one end of the
target and point the laser dot across the width
(Figure ).
H 1
• Press to display the width measurement at the
top of the display window.
) toward a wall
A 1
) to turn the tool on and
on the display window
).
F 3
) toward a wall
A 1
) to turn the tool on and
on the display
).
5.
Measure the length.
• Position the bottom of the tool at one end of the
target and point the laser dot across the length
(Figure ).
H 2
• Press to display the length measurement on
the second line of the display window.
6.
Measure the height.
• Positon the bottom of the tool at one end of the
target and point the laser dot across the height
(Figure ).
H 3
• Press to take the measurement.
7.
View the Volume measurement at the bottom of the
display window (Figure
Measuring the Height of a Tall Object
If you need to measure the height of a tall object (e.g.,
a tall building), you can calculate the height based on
the distances from the same point to 2 or 3 points on
the object. The tool will use the Pythagorean Theorem
(C =A +B ) to calculate the height.
2 2 2
Distances to 2 Points
You can use the distance to two points on a tall object
(Double Indirect Height) to determine its height (Figure
).
I 1
1.
Point the tool's laser (Figure
or object, and not toward anyone's eyes.
2.
Press (Figure
A 3
display the red laser dot.
3. FUNCT.
Press three times to show
UNITS
window (Figure F 4
4.
Position the tool opposite the bottom of the
building or object whose height you need to
measure (Figure
I
5.
Aim the laser at the highest point of the building or
object (Figure
I 2
6.
Press to measure the distance.
7.
From the same point, aim the laser straight ahead
toward the lowest point of the building or object
(Figure ).
I 3
).
F 3
) toward a wall
A 1
) to turn the tool on and
on the display
).
).
2
).
E
7