Kohler Sterling 402040 Guia De Instalacion página 6

1
Gasket
2
4. Install the Tank
Thread the supply hose (1) onto the tank.
Position the supplied gasket on the bowl inlet.
Position the tank on the bowl, running the supply hose through
the hole in the top of the bowl and through the side of the bowl.
Slide the hose guide (2) onto the hose, with the flared end last.
Slide the two inserts into the flared end of the hose guide. Firmly
push them in until they are flush with edge of the hose guide.
Firmly press the hose guide into the opening in the bowl.
Slide a metal washer (3) and rubber washer onto the bolt.
CAUTION: Risk of product damage. Overtightening may
cause breakage or chipping of the vitreous china.
Thread the two supplied bolts into the bowl through the bolt
holes in the bottom of the tank.
Tighten the bolts using a screwdriver. Do not overtighten.
IMPORTANT! Install the toilet seat now. The seat must be installed
before the remainder of the installation is completed.
1058763-2-B
3
Metal
Washer
Rubber
Washer
6 Sterling