Installation On Bases Deep More Than 900Mm - Galvamet KompaKTech Instrucciones De Uso Y Mantenimiento

EN
III.5 INSTALLATION ON BASES DEEP MORE THAN 900mm
For installation on bases deep up to 900mm the only options are described at previous
paragraphs III.2, III.3, III.4.
With a kitchen top deeper than 900mm further to the previous options it is possible to
increase the depth available to the drawers thanks to the replacement of the connector
identified with "1" (marking on the back) with the one identified with "2".
To do this, the aspiration box must be rotated in order to make maximum space
available inside the piece of furniture.
Carefully follow the operations described below.
In the box the technician will find the elements shown on Fig. 3.6.
Elements must be mounted carefully following the procedure described in this guide.
5x
Fig. 3.6
36