Introduction & Scope Of Use; Applicable Safety Standards; Worker Classifications - SafeWaze OSHA 1910 Manual Del Usuario

1.0 Introduction & Scope of Use
Thank you for purchasing a SafeWaze Cable Horizontal Lifeline. This manual must be
read and understood in its entirety, and used as part of an employee training program
as required by OSHA or any applicable state agency.
This manual and any other instructional material must be available to the user of the
equipment. The user must understand how to safely and effectively use a Horizontal
Lifeline, and all fall protection equipment used in conjunction with such.
The SafeWaze Cable Horizontal Lifeline has been designed for your safety. These
Horizontal Lifeline systems are designed to offer users a flexible anchorage between
two structures. The lines can also be used to provide a temporary barrier system.

2.0 Applicable Safety Standards

ANSI Z359.0 Definitions and Nomenclature Used for Fall Protection and Fall Arrest
ANSI Z359.1 Safety Requirements for Personal Fall Arrest Systems, Subsystems, and Components
ANSI Z359.2 Minimum Requirements for a Comprehensive Managed Fall Protection Program
ANSI A10-14 Safety Requirements for Safety Belts, Harnesses, Lanyards, and Lifelines for Construction and
Demolition Use
OSHA 1910.66 Personal Fall Arrest Systems
OSHA 1926.502 Fall Protection Systems Criteria and Practices

3.0 Worker Classifications

Understand the definitions of those who work in proximity of or may be
exposed to fall hazards.
Qualified Person: A person with an accredidated degree or certification, and with
extensive experience or sufficient professional standing, who is considered proficient in
planning and reviewing the conformity of fall protection and rescue systems.
Competent Person: A highly trained and experienced person who is assigned by the
employer to be responsible for all elements of a fall safety program, including, but not
limited to, its regulation, management, and application. A person who is proficient in
identifying existing and predictable hazards, and who has the authority to stop work in
order to eliminate hazards.
Authorized Person: A person who is assigned by their employer to work around or be
subject to potential or existing fall hazards.
It is the responsibility of a Qualified or Competent person to supervise the job
site and ensure safety regulations are complied with.
ANSI STANDARDS
OSHA REGULATIONS
V1.4 2019 Copyright SafeWaze
User Manual
Page 3