Cooper COOLER HC01 Manual De Instrucciones página 9

Adding More Ice and Removing Water
Ice will need to be added as additional beverages are chilled. The
ADD ICE indicator light in front of the unit is lit when the ice/water
bath is above 4°C/39°F. The ADD ICE indicator light will not turn
off until you press the START/STOP button to begin chilling your
next beverage.
To add more ice, follow the steps below:
1. Remove water until it is even with the minimum fill line.
To remove water, select the CAN + NO SPIN setting. Place a
cup under the water exit jet and press the START/STOP but-
ton. When the cup is full, press the START/STOP button again
and discard the water. Continue this process to remove more
water until it is at the minimum fill line.
2. Add a minimum of one tray of ice to the ice and water bin and
make sure no ice is trapped between the roller and side rib or
above the drive roller.
9
Instruction Booklet