Oster The Pro 1200 Guia De Inicio Rapido

The Oster
®
Oster Pro Blending Tips
®
ADD LIQUIDS IN THE JAR FIRST,
THEN ADD REMAINING INGREDIENTS
• Liquid to solid ratio is key!
• Add more liquid if ingredients are not
blending properly.
BONUS TIP: For frozen drinks and smoothies,
add enough liquid to the point where your
solid ingredients begin to float.
©2015 Sunbeam Products, Inc., doing business as Jarden Consumer Solutions. Boca Raton, FL 33431 All rights reserved. PN: 184574 SPR-080415-398P
Pro 1200 Blender QUICK START GUIDE
Using the Pre-Programmed Settings
1. Press On/Off button and press the desired Pre-Programmed
Setting Button:
– "Green/Frozen Smoothie"
– "Food Chop/Salsa"
– "Milkshakes"
2. To change your selection, press "STOP" followed by another
Pre-Programmed or manual Setting button.
3. Once the program is finished the cycle automatically stops. Press
the "STOP" button to cancel the program at any time. The blinking
blue light indicates that the blender is ready.
Using MANUAL CONTROLS
1. Press On/Off Button and Select Manual Control of your choice:
High / Med / Low / Pulse.
2. Press the "STOP" button to cancel the operation at any time.
3. Press the ON/OFF power button to turn blender off.
Using Blend-N-Go
• After adding ingredients, place blade assembly into cup and turn
clockwise to tighten. Make sure sealing ring is placed between
blade and cup
• Place cup assembly onto Blender base and hold cup in position
to operate. Follow instructions above.
www.osterblending.com
® Smoothie Cup
USE PULSE BUTTON FOR CHOPPING
BONUS TIP: Add ingredients in first that you
wish to process more thoroughly.
FOR BEST ICE CRUSHING
WITHOUT LIQUID
• Up to 6 large ice cubes.
• Use Pulse button until you achieve
desired results.
WITH LIQUID
• Fill jar with ice cubes (no ice limits) and
water until ice floats.
• Blend on high until you achieve desired
results then strain water.