Overlap strokes by 1/2 in. to prevent
streaking. Make additional strokes
4
without pressing the trigger to remove
more solution.
For heavily soiled areas, repeat the
cleaning process.
For best cleaning results, Hoover®
recommends to rinse the upholstery
with water only. This removes residual
cleaning solution.
If additional cleaning is
necessary, wait until the
upholstery is completely
dry before using the
tool again.
Empty Dirty Water Tank
when the motor sound
becomes higher pitched
and there is a loss in
suction (see "Automatic
Shut-Off").
When finished cleaning,
follow "After Cleaning"
and "After Using Tool"
instructions on page 14.
16