Hoover H-POWER 700 HP720PET Manual De Instrucciones página 4

GETTING TO KNOW YOUR CLEANER
A. Dust Bin Assembly
B. Cleaner Main Body
C. Parking Slot
D. On / Off Power Control Button
E. Cord Reel Button
F. Dust Bin Lid Opening Latch
G. Dust Bin Release Handle
H. Dust Bin Lid
I. Separation System with integrated
Shroud Cleaning System
J. Dust Bin
K. Dust Bin flap Release Button
L. Hose
M. Advanced Comfort Handle with
Soft Grip, Suction Regulator and
Integrated Accessories (See M1**)
M1. Integrated Accessories:
Built-in Crevice Tool, Dusting
Brush and Furniture Tool
N. Intelligent Handle with
integrated Dusting Brush**
N1. Integrated Dusting Brush*
O. Handle Suction Regulator**
P. Telescopic Tube**
P1. Telescopic Tube Adjuster**
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
1. Connect the hose to the cleaner main body, ensuring it clips and locks into position.
To release: simply press the buttons on the hose end and pull. [1]
2. Connect the hose handle** to the end of the extension tube upper, or accessories*
if required. [2]
3. Connect the extension tube lower to the carpet and floor nozzle**, [3] or accessories*
if required.
4. The cleaning accessory tools can be stored* after use on the underside of the
extension tube, using the accessory holder provided*.
* Certain Models Only ** May vary according to model
P2. Telescopic Tube Secure Connection*
Q. Exhaust Filter
R. Accessory Holder*
S. Carpet and Floor Nozzle (GP)**
Sa. Carpet and Floor Nozzle
Secure Connection*
Sb. Floor Type Selector Pedal
Sc. Nozzle Suction Regulator*
T. Pre-motor Filter
U. Carpet and Floor Nozzle (GP)**
Ua. Floor Type Selector Pedal
V. Furniture Tool*
W. Crevice Tool*
X. Long 2in1 Tool*
Y. Advanced Furniture Nozzle*
Z. Mini Turbo Dual Action Pet
Hair Remover Nozzle*
AA. Mini Turbo Dual Action Allergen
Remover Nozzle*
AB. Parquet Extra Nozzle*
AC. Parquet Extra Care Nozzle*
AD. Accessories Car Kit*:
a. Accessories Bag
b. Big Dusting Brush
c. XL Flexible Crevice Tool
USING YOUR CLEANER
1. Extract power cord and plug it into the power supply. Do not pull the cord beyond
the red marker. [6]
2. Adjust the length of the telescopic tube by moving the telescopic tube adjuster** up
and raise or lower the hose handle to the most comfortable cleaning position. [5]
Carpet & Floor Nozzle**. Press the pedal on the nozzle [4] to select the ideal cleaning
3.
mode for the floor type.
Hard Floor: The brushes are lowered to protect the floor.
Carpet: With lifted brushes for the deepest clean.
Carpet & Floor Nozzle**: [4]
- Hard floor Cleaning: Press the floor type selector pedal on the nozzle on Hard Floor
mode and adjust the nozzle suction regulator to open [4a] or close [4b] position
for the most comfortable cleaning position. In this position brushes are lowered to
protect hard floors.
- Carpet Cleaning: Press the floor type selector pedal on the nozzle on Carpet mode
and adjust the nozzle suction regulator to open position. In this position brushes are
raised for a deeper cleaning of your carpet. [4c] It's suggested to open the nozzle
suction regulator on carpet to allow a better sliding.
Switch the cleaner on by pressing the On/Off button on the cleaner main body. [8]
4.
Fixed Power Control* - The cleaner will operate at a fixed power setting.
5.
Advanced Comfort Handle with Integrated Accessories:** [M, M1]
- Built-in Crevice Tool: The hose handle end can be used as a crevice tool to reach
narrow spaces.
- Furniture Tool: Press the latches on both sides of the handle and slide downwards
to release the furniture tool to clean soft surfaces and textiles (curtains, upholstery).
- Dusting Brush: Press the latches on both sides of the handle and slide
downwards,then push the slider to the end to release the built-in dusting brush. Ideal
for hardsurfaces (bookshelves, keyboards, skirting boards).
- Suction Regulator**: Adjust the suction by opening or closing the air valve on the
handle. [9, O**]
Intelligent Handle**: [N,N1]
- Suction Regulator** [O]: Adjust the suction power by opening or closing the air
valve on the handle.
- Dusting Brush: It is integrated directly underneath the hose handle.
6. Switch off at the end of use by pressing the On/Off Button on the cleaner main body.
Unplug and rewind the power cord by pressing the cord reel button.
7. Parking and storage - The tube can be parked for temporary storage while in use, or
in the storage position when not in use. [11]
2
GB