When Using The Wall-Hanging Bracket - Panasonic Viera TX-40DXU601 Manual Del Usuario

Note
Design and Specifications are subject to change
without notice. Mass and Dimensions shown are
approximate.
For information about the power consumption, display
resolution, etc., refer to Product fiche.
For information about the open source software, refer
to [eHELP] (Support > Licence).

When using the wall-hanging bracket

Please contact your local Panasonic dealer to purchase
the recommended wall-hanging bracket.
Holes for wall-hanging bracket installation
Rear of the TV
a
(View from the side)
Depth of screw
40-inch model
minimum: 9 mm
maximum: 27 mm
49-inch model
minimum: 8 mm
maximum: 22 mm
55-inch model
minimum: 10 mm
maximum: 16 mm
Diameter: M6
Screw for fixing the TV onto the
wall-hanging bracket (not supplied with
the TV)
Warning
Using other wall-hanging brackets, or installing a wall-
hanging bracket by yourself have the risk of personal
injury and product damage. In order to maintain the
unit's performance and safety, be absolutely sure to
ask your dealer or a licensed contractor to secure
the wall-hanging brackets. Any damage caused by
installing without a qualified installer will void your
warranty.
Carefully read the instructions accompanying optional
accessories, and be absolutely sure to take steps to
prevent the TV from falling off.
Handle the TV carefully during installation since
subjecting it to impact or other forces may cause
product damage.
Take care when fixing wall brackets to the wall.
Always ensure that there are no electrical cables or
pipes in the wall before hanging bracket.
To prevent fall and injury, remove the TV from its fixed
wall position when it is no longer in use.
40-inch model
a: 200 mm
b: 200 mm
b
49-inch model
55-inch model
a: 400 mm
b: 400 mm
English
21