ABB CP-C MM Guía De Usuario página 11

Technical data - Messaging module CP-C MM
o
Data at T a = 25 C, U = 230 V AC, unless otherwise indicated
in
Type
Input circuit - Supply circuit
Rated input voltage U
in
Input voltage range
Power consumption
Input circuit - -Control circuit
Kind of triggering
Control input, control function
Threshold value „Switching-off power supply unit"
Threshold value „Switching-on power supply unit"
Input current
Max. cable length to the control input
Measuring circuit - INPUT
Monitoring function
Thresholds
Hysteresis, related to the threshold value
Accuracy, tolerance
Maximum measuring cycle
Measuring circuit - OUTPUT
Monitoring function
Thresholds
Hysteresis, related to the threshold value
Accuracy, tolerance
Maximum measuring cycle
Output circuits
Kind of output
Operating principle
Contact material
Rated operational voltage U e (IEC/EN 60947-1, VDE 0110)
Minimum switching voltage / Minimum switching current
Maximum switching voltage / Maximum switching current
Rated operational current I e
(IEC/EN 60947-1)
Mechanical lifetime
Electrical lifetime
Max. fuse rating to achieve
short-circuit protection
Indication of operational states
Remote off
Status of power supply input
Status of power supply output
Remote OFF
AC12 (resistive)
AC15 (inductive)
DC12 (resistive)
DC13 (inductive)
n/c contact
n/o contact
REMOTE OFF: green LED
INPUT OK: green LED
OUTPUT OK: green LED
110-240 V AC / 100-350 V DC
70-264 V AC / 80-350 V DC
volt-free (dry/floating) triggering
typ. 1 mA (200 mA for 200 μs)
powered by the input circuit of the power supply unit
undervoltage monitoring of input voltage of the
AC: typ. -8 % / DC: -30 %
powered by the output circuit of the power supply unit
undervoltage monitoring of output voltage of the
relays, 2 x 1 c/o (SPDT) contact
230 V
230 V
24 V
24 V
30 x 10
0.1 x 10
V: „REMOTE OFF" input R
V: relay „INPUT OK" energized
V: relay „OUTPUT OK" energized
CP-C MM
2.5 VA / 1.5 W
remote off
R 1 kOhm
R 10 kOhm
25 m - 100 pF/m
power supply unit
85 V AC / 90 V DC
- 5 % at AC and DC
typ. < 50 ms
power supply unit
20 V DC
typ. 5 %
1 %
typ. < 10 ms
11-12/14, 21-22/24
closed-circuit principle
AgNi
250 V
24 V / 10 mA
250 V / 1 A
1 A
1 A
1 A
1 A
6
switching cycles
6 switching cycles
2 A, gL
2 A, gL
1 kOhm
11