Starting The Blower - Toro Flex-ForcePowerSystem Manual Del Usuario

Specifications
Model
Rated Voltage
Charger Type
Battery Type
Appropriate Temperature Ranges
Charge/ store the battery pack
at
Use the battery pack at
Use the blower at
*Charging time will increase if you do not charge the
battery within this range.
Store the tool, battery pack, and battery charger in an
enclosed clean, dry area.
51824
60V DC maximum, 54 VDC
nominal usage
88602, 88605, or 88610
(included with 51824)
88620 (included with 51824),
88625, 88640, 88650, 88660,
or 88675
5°C (41°F) to 40°C (104°F)*
-30°C (-22°F) to 49°C (120°F)
0°C (32°F) to 49°C (120°F)
Operation
WARNING
The blower can throw debris, possibly
causing serious personal injury to you or
bystanders.
• Do not blow hard objects, such as nails or
bolts.
• Do not operate the blower near bystanders
or pets.
• Be careful of blowing direction (i.e.,
blow away from bystanders, windows,
automobiles, etc.). Only use as much
speed as required.
• Use extra care when cleaning debris from
stairs or other tight areas.
• Wear safety goggles or other suitable eye
protection, long pants, and slip-resistant
footwear.

Starting the Blower

Important:
Use the battery pack only in
temperatures that are within the appropriate
range; refer to Specifications (page
1. Make sure that the vents on the blower are clear
of any dust and debris.
2. Align the cavity on the battery pack with the
tongue in the handle housing
3. Grasp the handle, and push the battery pack
into the handle until the latch locks into place
(Figure 6).
1. Battery latch
4. To start the blower, squeeze the variable-speed
trigger (Figure
Note:
Engage the speed lock to keep the
machine on without pressing the variable-speed
trigger (Figure
8
8).
(Figure
Figure 6
7).
7).
6).
g273146