Installing Modules - Desoutter CVI II Manual De Inicio Rápido

6159931440
Issue no: 05
Series: -
READ BEFORE INSTALLING
Be aware that errors of
manipulation can cause connection
problems or a deterioration of
electrical contacts.
We strongly recommend that a
technician from Desoutter installs
the modules. Contact your Desoutter
representative for support.
● Use Desoutter Fieldbus modules only.
Desoutter Fieldbus modules have specific
references:
ModbusTCP
DeviceNet
Ethernet/IP
Profibus
6 / 36
Profinet I/O Class A (1 port)
Profinet I/O Class B (2 ports)
Profinet I/O Class C (2 ports IRT/MRP) AB6918
CC-Link

INSTALLING MODULES

CVI II range
● Check that the CVI controller firmware
version is 6.x as a minimum.
● Refer to the manual supplied in the kit.
CVIx II range
AB6446
● Power off the controller.
AB6424
● Locate the Fieldbus connector at the bottom
AB6430
panel (see below).
AB6422
When the Fieldbus module is not
into its location, the cover must
remain in place.
AB6425
AB6431
AB6432
07/2020