UltraCOOL CP70 Guía De Uso Y Cuidado página 5

For Fan Only Operation:
With unit turned on:
1. Press the SPEED button and adjust as desired.
2. The FAN portion of the panel will show icons indicating the selected speed and
the VENT icon will be illuminated in the center of the panel.
Low Water Indication:
1. When the water tank has been depleted to a certain level, a LOW WATER
indicator will display on the PUMP portion of the Control Panel. The COOL
(snowflake) icon will go off, and the VENT (fan) icon will illuminate. The pump
will stop operating and an audible beeping will sound for 60 seconds or until
the PUMP button is pressed.
NOTE: If refilled within 60 seconds of the beeping, the pump will restart
automatically.
2. Otherwise, refill the tank and press the PUMP button to restart the pump.
Additional Features:
Oscillate Feature:
1. When the OSCILLATE button is pressed the vertical louvers on the front grill
move left and right.
2. The OSCILLATE portion of the display will indicate activation of this feature.
3. Press again to turn feature off. This feature is available anytime the FAN
function is turned on.
Timer Feature:
This unit has a timer feature that allows setting the duration of operation from half an
hour to 8 hours, in 0.5 hour increments. When the set time is on the last half hour,
the time will count down in tenths until it reaches 0.0 and turns off completely.
1. To set the timer, press TIMER and keep pressing until the desired amount is
displayed in the TIMER section of the display.
2. Once the desired time is displayed, release the button. After 5 seconds the
time is confirmed.
3. To cancel (after confirmation) press the TIMER button again.
NOTE: If continuous operation is desired Press TIMER and set at 0.0. The fan will
run continuously. The pump will not operate if there is no water in the unit.
5