Tabla de contenido
Publicidad
ATX 12V Power
Connector
(4-pin ATX12V2)
(see p.1, No. 34)
Thunderbolt AIC
Connectors
(5-pin TB1)
(see p.1, No. 32)
SPI TPM Header
(13-pin SPI_TPM_J1)
(see p.1, No. 17)
RGB LED Headers
(4-pin RGB_LED1)
(see p.1, No. 29)
(4-pin RGB_LED2)
(see p.1, No. 7)
24
SPI_DQ3
+3.3V
Dummy
CLK
SPI_MOSI
RST#
TPM_PIRQ
1
SPI_TPM_CS#
GND
RSMRST#
SPI_MISO
SPI_CS0
SPI_DQ2
1
12V G R
B
Connecting an ATX
12V 4-pin cable here is
optional.
*The power supply plug
fits into this connector in
only one orientation.
Please connect a Thunderbolt™
add-in card (AIC) to the
Thunderbolt AIC connector via
the GPIO cable.
*Please install the Thunderbolt™
AIC card to PCIE3 (default
slot).
This connector supports SPI
Trusted Platform Module (TPM)
system, which can securely store
keys, digital certificates, pass-
words, and data. A TPM system
also helps enhance network
security, protects digital
identities, and ensures platform
integrity.
These two RGB headers are used
to connect RGB LED extension
cable which allows
users to choose from various LED
lighting effects.
Caution: Never install the RGB
LED cable in the wrong orienta-
tion; otherwise, the cable may
be damaged.
*Please refer to page 36 for
further instructions on these two
headers.
Publicidad
Tabla de contenido
