Sena SRL2 Guia Del Usuario página 267

Ocultar thumbs Ver también para SRL2:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

2. If the tuner finds a station while searching frequencies, it stops
the seek function.
3. To save the current station, press the Center Button for 3 seconds
until you hear a voice prompt saying "Preset (#)".
4. Tap the (+) Button or the (-) Button, in order to select which preset
number you want for that specific station. You can save up to 10
preset stations. (You may cancel the preset operation by waiting
approximately 10 seconds. You will then hear "Save preset
cancelled". You can also tap the (+) Button or the (-) Button until
you hear "Cancel". Press the (+) Button for 1 second to confirm
cancellation. You will then hear "Save preset cancelled".)
5. To save the current station, press the (+) Button for 1 second. You
will then hear a voice prompt saying "Save preset (#)".
6. To delete the saved station in the preset number, press the (-)
Button for 1 second. You will then hear a voice prompt saying
"Delete preset (#)".
Note:
1. You can save FM stations to presets before using FM radio. Connect the
SRL2 to your PC and open the Device Manager. It allows you to save up
to 10 FM station frequency presets on the SRL2 settings menu. You may
do the same operation by using the Sena Smartphone App.
2. You can still answer an incoming phone call and intercom while listening
to the FM radio.
10.4 Scan and Save
"Scan" is the function that automatically searches station frequencies,
starting from the current frequency and up. To use the scan function,
please follow the procedures below:
1. Press and hold the (+) Button for 1 second. Then the current
station frequency moves upward to find other station frequencies.
2. If the tuner finds a station, it stays at the station frequency for 8
seconds, then searches the next station frequency.
3. Scan function stops when you press and hold the (+) Button for
1 second.
4. To save a station while scanning frequencies, tap the Center
Button when at that station. You will hear a voice prompt saying
"Save preset (#)". The station will be saved as the next preset
number.
5. All stations preset during "Scan" will overwrite previously set
stations.
SRL2
29

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido