Allen-Bradley MobileView 2727-TRSP1 Serie Instrucciones De Instalación página 7

Cleaning
Troubleshooting
To reduce shock hazard and possible damage to the
WARNING
charger, always disconnect the power cord from the
wall outlet and charger before cleaning the charger.
!
Unit
Disconnect the power cord and power supply from the charger. The
case and faceplate can be cleaned using a soft cloth dampened with
water. Alcohol can be used for stubborn stains. Do not apply liquids
directly to the unit; apply sparingly on the cloth.
Contacts
The contacts on the charger and battery holders can be cleaned by
gently rubbing with a pencil eraser. Do not use abrasive or harsh
detergent cleaners.
Table 2 Troubleshooting
Symptom/Situation
(Fault Indication)
Charge or ready indicators
do not illuminate when
battery is inserted.
Automatic power supply
shut down.
Power supply power
indicator is not lit.
MobileView Tablet Power Kit
Probable Cause
Power supply cord is not
connected to wall or power
supply.
Connecting AC power
source before connecting
the power supply to the
charger.
Power supply protection
circuitry is tripped.
Bad power supply.
7
Corrective
Action/Solution
Check power supply cord.
Disconnect AC power
source, wait 15 seconds,
reconnect AC power source.
Unplug power supply and
retry in 15 minutes.
Replace power supply.
Publication 2727-IN007B-MU-P