Allen-Bradley MobileView 2727-TRSP1 Serie Instrucciones De Instalación página 8

8 MobileView Tablet Power Kit
Specifications
Publication 2727-IN007B-MU-P
Table 2 Troubleshooting
Symptom/Situation
(Fault Indication)
Charge indicator continues
to flash after battery
insertion.
Charger will not go into
charge.
Battery not getting full
charge.
Table 3 Specifications
Dimensions
Weight
Input voltage
Charge Temperature
Certification
For indoor use only.
TIP
Probable Cause
Over discharged battery.
Defective battery.
Hot battery.
Dirty contacts/connection.
Defective battery.
Defective charger.
Dirty contacts/connection.
Defective battery.
1.5 in x 3.2 in x 5.1 in
(3.8 cm x 8 cm x 13 cm)
0.4 lbs (180 g)
15V, 2A
5°C to 40°C (41°F to 104°F)
25°C (77°F) is Optimal Charge Temperature
UL/CSA DC wall supply
Corrective
Action/Solution
Leave battery in charger for
15 minutes then reinsert.
Replace battery.
Let battery cool.
Clean contacts.
Replace battery.
Replace adapter.
Clean contacts.
Replace battery.