Kohler K-3082 Guia De Instalacion página 9

Screw #3
Screw #1
Screw #2
Hinge Adjustment
5. Install the Door
Re-attach the door.
The door is provided with a three-way adjustment feature for
alignment. You can adjust the height, level, and fit to the frame
gasket. Use a #2 Phillips screwdriver to make adjustments.
If the door is out of level or too close to one side, adjust the door
to the left or to the right with screw #1.
If the door is too high or too low, adjust it up or down with
screw #2.
If the door opens swiftly, squeaks or rubs against the gasket,
adjust the door outward with screw #3.
Check the door swing. The hinges are provided with a 110° black
plastic stop to restrict the door from swinging wide.
Kohler Co. 9 1010988-2-E