Grundig MC 8840 Manual Del Usario página 22

POWER_SUPPLY_ __________________________
Operating_with_the_power_
adapter
Check that the voltage indicated
on the rating plate of the power
adapter corresponds to your local
power supply.
The only way to disconnect the ap-
pliance from the power supply is to
unplug the power adapter.
1_ Plug the charging plug
appliance socket and the power
adapter into the wall socket.
H
Note
The groove on the charging plug
7
must match the notch in the
I
appliance socket.
– When the appliance are
charged, charge/discharge
current capacity display
symbol will display and start
flashing, red plug symbol will
display continually;
80
22 ENGLISH
– Once the appliance is com-
into the
I
2_ Red plug symbol and red
charge/ discharge current ca-
pacity display symbol start flash-
ing when the unit reaches low
battery capacity during opera-
tion, It is time to recharge.
pletely charged, charge/
discharge current capacity
display symbol will display
continually.
100
30