Remington Curl and Dry Manual Del Usuario página 4

ENGLISH
• Keep the power plug and cord away from heated surfaces.
• Do not leave the appliance unattended while plugged in.
• Do not place the appliance on any soft furnishings.
• Do not use attachments other than those we supply.
• Do not set the appliance down while still on.
• Do not twist or kink the cable, or wrap it round the appliance.
• Do not use the appliance if it is damaged or malfunctions.
• Check the cord regularly for any sign damage.
• Let the attachments cool before removing.
• This appliance is not intended for commercial or salon use.
PARTS
1. 400W power handle
2. 25mm bristle brush
3. 19mm round brush
4. Speed/heat setting switch
INSTRUCTIONS FOR USE
1. Wash and condition your hair as normal.
2. Squeeze out excess moisture with a towel and comb through.
3. Hairsprays contain flammable material – do not use while using this product.
4. Select your attachment before you turn on the appliance.
5. Attachments can be connected to the power handle by unscrewing the attachment cap
(6), sliding the brush onto the inner support and securing by screwing back on the
attachment cap.
6. Plug the product into the mains power supply.
7. To turn the product on slide the speed/heat setting switch to position 'I'
8. Dry roots completely and dry length 90% dry, ready for styling.
9. Section the hair prior to styling. Style the lower layers first.
10. The 25mm thermal bristle brush adds volume to your roots. It can also create looser
curls and waves.
11. The 19mm round brush creates small curls and flicks to short and medium layered hair.
12. Select the desired temperature and speed setting using the switch on the handle.
13. To increase the setting slide the heat/speed setting switch to position 'II'
14. For all brush attachments: Take a section of hair and place the ends around the brush.
Rotate the styler allowing the hair to wrap around the barrel of the brush drying and
styling as you go.
15. To release the hair when curled around the brush attachments press the curl release
button to allow the brush to rotate freely.
16. Allow the hair to cool before styling.
17. Let the attachments cool before removing.
4
5. Curl release button
6. Attachment cap
7. Swivel cord