Sangean WR-50 Instrucciones De Manejo página 10

Listening music via Bluetooth streaming
You need to pair your Bluetooth device with your WR-50 before you can
auto-link to play/stream Bluetooth music through your WR-50. Paring
creates a 'bond' so two devices can recognize each other.
Pairing and playing your Bluetooth device for the first time
1. Press the Source button to select Bluetooth (BT) function. The "BT
READY" will show on the display. The Bluetooth pairing icon and
"READY" symbol on the panel will flash and the Bluetooth pairing
indicator will turn blue. The indicator flashes blue indicating the radio
is discoverable.
2. Activate Bluetooth on your device according to the device's user
manual to link to the radio. Locate the Bluetooth device list and
select the device named 'WR-50' (With some Smartphone's that are
equipped with earlier versions than BT2.1 Bluetooth device, you may
need to input the pass code "0000")
3. Once connected, there will be a confirmation tone sound and the
Bluetooth indicator will remain in solid blue. The display will be
changed to show "BLUETOOTH" and the Bluetooth pairing icon will
remain illuminated. You can simply select and play any music from
your source device. The volume control can be adjusted from your
source device, or directly from the radio.
4. Use the controls on your Bluetooth-enabled device or on the radio to
play/pause and navigate tracks.
9
Note:
1) If 2 Bluetooth devices are pairing for the first time, both must search
for your radio, it will show its availability on both devices. However,
if one device links with this unit first, then the other Bluetooth device
won't find it on the list.
2) If you take your source device out of range, the connection will be
temporarily disconnected to your radio. Your radio will automatically
reconnect if the source device is brought back in range. Be aware
that during the period of disconnection, no other Bluetooth device
can pair or link with your radio.
3) If 'WR-50' shows in your Bluetooth device list but your device cannot
connect with it, please delete the item from your list and pair the
device with the radio again following the steps described previously.
4) The effective operation range between the system and the paired
device is approximately 10 meters (30 feet). Any obstacle between
the system and the device can reduce the operational range.
5) Bluetooth/NFC connectivity performance may vary depending on
the connected Bluetooth devices. Please refer to the Bluetooth
capabilities of your device before connecting to your radio. All
features may not be supported on some paired Bluetooth devices.
6) With some mobile phones, making/receiving calls, text messages,
e-mails or any other activities unrelated to audio streaming may
mute the Bluetooth audio streaming or even temporarily disconnect
from your device. Such behavior is a function of the connected
device and does not indicate a fault with your WR-50.