Operating Basics; Setting The Date And Time - Mio MiVue 388 Guia De Inicio Rapido

To ensure the optimal recording angle, pay attention to the following:
1. Make sure that your car is parked on a level ground.
2. When adjusting the angle of mounting, make sure that the camera's view is
parallel with the level ground, and the ground/sky ratio is close to 6/4.

Operating basics

CAUTION: DO NOT remove or insert the memory card while recording.
Connect the recorder to the car charger according to the installation instructions in
the previous "Using your recorder in a vehicle" section.
Turning the recorder ON and OFF
Once the vehicle engine is started, the recorder automatically turns on. By default,
the recording will start right after the recorder turns on.
When a GPS fix is established, the
screen. The number of the vertical bars in the icon indicates the strength of the signal.
When the vehicle engine is turned off, the recorder automatically saves the recording.
By default, the recorder will turn off immediately.
To manually turn the recorder on and off, press and hold the Power key
seconds.

Setting the date and time

To make sure of the correct date and time for your recordings, please check the date
and time settings before you begin recording.
English
icon will show on the top-right corner of the
for 2
7