Continuous Recording - Mio MiVue 388 Guia De Inicio Rapido

1. Press the Menu key
2. Select Date / Time and press the OK key.
3. Use the ▲ and ▼ keys to adjust the value and press the OK key.
4. Repeat Step 3 until all fields have been changed.
Recording in driving mode

Continuous recording

When you connect the car charger to the cigarette lighter in the car, the recorder will
start continuous recording automatically. The recording may be divided into several
video clips; recording will not stop between video clips.
The recorder automatically stops and saves the recording when the vehicle engine is
turned off. If you want to stop recording manually, press the ▼ key.
When recording is not in progress, you can manually start the continuous recording at
any time by pressing the OK key. To stop recording, press the ▼ key.
The continuous recordings can be found in the "Video" category for file playback.
Note: If continuous recording is ongoing but there is not enough space on your
memory card, new video clips will replace the old ones.
Event recording
By default, if an event happens, such as sudden impact, high-speed driving, an
overdone turn or an accidental crash, the G sensor will prompt the recorder to start
an event recording.
If you want to manually start an event recording while continuous recording is in
progress, press the OK key.
To stop recording, press the ▼ key.
The event recordings can be found in the "Emergency" category for file playback.
8
to access the Settings menu.
English