Manually Set Clock; Temperature - Oregon Scientific RMR802 Manual De Usuario

RMR802A:
• WWVB-60 signal: within 3200km (2000 miles) of
Fort Collins Colorado.
To enable / disable signal reception:
Press and hold to enable or
reception.
NOTE Reception takes 2-10 minutes. If the signal is
weak, it can take up to 24 hours to get a valid signal.If
signal reception is unsuccessful, place your unit next
to a window, press and hold
search.
Clock signal reception indicator:
STRONG
SIGNAL

MANUALLY SET CLOCK

To set the clock manually, disable the signal reception
first.
1. Press and hold MODE.
2. Press or to change the settings.
3. Press MODE to confirm.
4. The settings order is: time zone, 12/24 hr format,
hour, minute, year, calendar mode (day – month /
month – day), month, day and language.
to disable signal
to force another signal
WEAK / NO
SIGNAL
RMR802: Time zone offset sets the clock +/- 23 hours
from the received clock signal time.
RMR802A: Select the time zone: (P) Pacific, (E) Eastern,
(C) Central or (M) Mountain.
NOTE The language options are English (E), German
(D), French (F), Italian (I), Spanish (S) and Russian
(R).
To select display mode:
Press MODE to choose between clock with seconds,
clock with weekday or calendar.

TEMPERATURE

To toggle temperature unit:
Press °C / °F.
To toggle between each outdoor sensor's readings:
Press repeatedly.
OR
Press and hold + MEM for 2 seconds to initiate auto
toggle of outdoor channels.
To end press .
To toggle between current, minimum and maximum
records:
Press MEM repeatedly.
To clear the records:
Press and hold MEM.
5