Clock; Clock Reception; Manually Set Clock - Oregon Scientific BAR806 Manual De Usario

TIP The transmission range may vary depending on
many factors. You may need to experiment with various
locations to get the best results.

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its clock
automatically with a clock signal.
BAR806:
Slide EU / UK to select the signal received.
• EU: DCF-77 signal: within 1500 km (932 miles) of
Frankfurt, Germany.
• UK: MSF-60 signal: within 1500 km (932 miles) of
Anthorn, England.
BAR806A:
• WWVB-60 signal: within 3200km (2000 miles) of Fort
Collins Colorado.
To enable / disable signal reception:
Press and hold to enable or
reception.
A channel has been found.
The sensor cannot be found.
to disable signal
NOTE Reception takes 2-10 minutes. If the signal is
weak, it can take up to 24 hours to get a valid signal.
If signal reception is unsuccessful, place your unit next
to a window, press and hold
search.
Clock signal reception indicator:
STRONG SIGNAL

MANUALLY SET CLOCK

To set the clock manually, disable the signal reception first.
1. Press and hold MODE.
2. Press or to change the settings.
3. Press MODE to confirm.
The settings order is: time zone, 12/24 hr format,
hour, minute, year, calendar mode (day – month /
month – day), month, day and language.
BAR806: Time zone offset sets the clock +/- 23
hours from the received clock signal time. If you have
deactivated the clock signal reception, do not set a
value for time zone.
BAR806A: Select the time zone: (P) Pacific, (E)
Eastern, (C) Central or (M) Mountain.
NOTE The language options are English (E), German
(D), French (F), Italian (I), and Spanish (S), and Russian
(R).
5
to force another signal
WEAK / NO SIGNAL