Metra 99-6514B Instrucciones De Instalación

KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8" Phillips screws • E) (2) Plastic panel clips • F) (2) Metal panel clips
• Axxess interface and harness (not shown)
A B
The World's Best Kits.
®
Dodge Charger
KIT FEATURES
• ISO DIN radio provision with pocket
• ISO DDIN radio provision
• Included interface retains factory screen
• Painted matte black to match factory finish
Note: Reference the Troubleshooting section for factory items known
to be no longer functional.
C D
MetraOnline.com
2011-2014
E F
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
99-6514B
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Assembly
– ISO DIN radio provision with pocket .................3
– ISO DDIN radio provision ....................................3
Axxess Interface Installation .............................4-8
WIRING & ANTENNA CONNECTIONS
Wiring Harness: Interface and harness included
Antenna Adapter: 40-EU10*
Steering wheel control interface: ASWC-1*
Backup camera retention: AX-CHRYCAM-1*
* Sold separately
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• T-30 Torx screwdriver
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 8/13/19 INST99-6514B