Introduction; Important Safety Instructions - Tripp-Lite SRCOOL33K Manual Del Propietário

Ocultar thumbs Ver también para SRCOOL33K:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Introduction

The SRCOOL33K Row-Based Server Rack Cooling System provides 33,000 BTU of efficient, reliable cooling in a 42U rack form factor. It
features cutting-edge components that enable precision cooling adjustments to minimize power consumption, maximize cooling and improve
your application efficiency. Controlling the unit is simple with the menu-driven, multi-line LCD display, or control it from anywhere in the world
with the Java-free, HTML5-based LX Platform Card.

2. Important Safety Instructions

SAVE THESE INSTRUCTIONS
All sections of this Owner's Manual contain instructions and warnings that must be followed during the operation of the products described
in this manual. Read ALL instructions before attempting to operate these products. Failure to comply may invalidate the warranty and cause
serious property damage and/or personal injury.
• Prior to use, the individual user must determine whether this device is suitable, adequate or safe for the use intended. Since individual
applications are subject to great variation, the manufacturer makes no representation or warranty as to the suitability or fitness of this
device for any specific application.
• The cooling unit operates under pressure. Observe proper safety precautions when operating or servicing the unit.
• Do not operate the unit with any cover, guard, door, or panel removed unless the instructions indicate otherwise.
• Do not run cabling or service utilities in front of the fan outlets.
• Connect the unit directly to a grounded AC power outlet. Failure to do so may cause electric shock or fire.
• Never use an extension cord to connect the unit to a power source.
• The power supply for the unit must be rated as specified on the unit's nameplate.
• Never modify the unit's plug or use an adapter if the unit is equipped with an input power cord.
• Comply with all local and national wiring and safety regulations applicable where the unit will be installed, e.g. The National Electric Code
(NEC) in the United States.
• Never use the input cord as a means to turn the unit on or off. A serious electric shock may occur. Always use the control panel to power
the unit on or off.
• Always turn the unit off and disconnect it from the mains input source by unplugging the unit or opening the mains circuit breaker before
performing maintenance.
• Before connecting the unit to a dedicated drainage system, turn it off and unplug it.
• Maintenance should be performed by trained personnel only.
• Do not use thinners, alcohol, detergents or abrasive brushes to clean the unit's cabinet. These may damage the cabinet.
• Do not operate the unit without the air filter. This may cause dust accumulation that can damage the unit.
• Do not attempt to operate the unit in any room with inadequate air circulation. There must be adequate airflow to the condenser.
• Do not place objects on top of the unit.
• Prior to operation, ensure that:
• The unit has been properly installed in accordance with the procedures detailed in the Installation Manual
• There is no evidence of damage to the unit
• The unit is level and stabilized
• The clearance around the cooling unit complies with local and national codes and regulations as well as the installation manual
2

Publicidad

Tabla de contenido
loading

Tabla de contenido