Samsung POWERbot SR1AM70 Serie Guía De Referencia Rápida página 9

3
When the product is purchased, the battery is not charged, so charging must initially be done
manually.
How to turn on the
emergency switch
Hold the robot vacuum cleaner and
turn on the emergency switch without
pressing any buttons.
0.5 m
Ensure the power
cord is arranged
neatly next to the
wall.
Charging
<SR1AM7010U* Series>
<SR1AM7040W* / SR2AM70****
Series>
Please install the docking station in a place
where the floor is level and wall is straight.
Ú Install with the grain of wood
floors.
0.5 m
1 m
English-9
Check the charging status.
For the SR1AM7010U* Series, the
battery indicator blinks at 1 second
intervals during charging. The
indicator will remain on when the
battery is fully charged.
For SR1AM7040W* / SR2AM70****
Series, each section of the "
will turn on successively to indicate
charging progress and "FULL" will
appear when charging is complete.
Install the charger where the
robot vacuum cleaner can
easily find it.
Make sure the
charge pins on the
robot vacuum cleaner
and the charger are
aligned.
"