Basic Operation
Playing a DVD or Video CD
●1. Slide the power switch on the DVD player to the ON position.
2. Press OPEN to open the disc tray and insert your chosen disc in the tray, with the label side facing up
3. Close the tray. Play starts automatically.
NOTE: Some discs do not support menus and start to play automatically.
●
Use
to select the title/chapter you want to view, and then press ENTER to start. Press MENU to return to the menu
screen. Some discs do not support menus and start to play automatically.
●
Use the numeric buttons to select the track you want to view and press MENU to return to the menu screen. Menu settings and
operating procedures may differ. Follow the instructions on each menu screen.
Notes:
1. If parental control is set and the disc isn't fit for the rating setting you must input the password.
2. DVDs may have a region code. Your player does not play discs that have a region code different from your player.
3. Unless stated otherwise, all operations described use the remote control. Some features may also be available on the setup
menu.
●Moving to another CHAPTER/TRACK
When a title on a disc has more than one chapter or a disc has more than one track, you can move to another chapter/track as
follows:
1. Press SKIP
or
2. Press SKIP
twice briefly to return to the previous chapter/track.
3.
To go directly to any chapter / track during DVD playback, input the chapter/track number.
than 9, use the 10+ button to enter the first digit then use the numeric buttons to enter the second digit.
●Changing the Audio Channel
Press AUDIO repeatedly until the desired audio mode is selected during play.
A-B
●Repeat
To repeat a sequence,
1. Press
AB
at the chosen starting point. "
2. Press
AB
again at the chosen end point. "
3. Press
AB
again to cancel.
●Repeat
You can play a title/chapter/all/track on a disc repeatedly.
Press REPEAT during play to select a desired repeat mode.
DVD Video Discs – "
Repeat chapter / title / all"
CHAPTER: repeats the current chapter.
TITLE: repeats the current title.
ALL: repeats all the tracks on a disc.
Video CDs, discs – "
Repeat Track /All"
Track: repeats the current track
All: repeats all the tracks on a disc.
Notes:
On a Video CD with PBC, you must set PBC to off to use the repeat function.
●Zoom
For DVD and VCD, you can zoom in and out for video images or pictures.
Press ZOOM to change the size in the following sequence. The square frame appears in the right bottom of the picture after each
press of ZOOM.
2X size → 3X size → 4X size →1/2 size →1/3 size
Note: Zoom may not work on some DVDs.
9
DVD
briefly during play to select the next or previous chapter/track.
" appears on the screen.
" appears on the screen and the repeat sequence begins.
→1/4 size
→ normal size
.
(See "Parental" on page
If the track / chapter number is greater
24).