General Description - Evolution R230DCT Instrucciones Originales

GENERAL DESCRIPTION

Evolution Concrete Cutting Saws have
been designed to incorporate many unique
& time saving design features. Some of
these features are shared across the range.
Refer to the Specification section of this
Instruction Manual to identify the specific
features found on any particular machine.
Shared Features:
• Safety Start ON/OFF Trigger Switch
• Widely spaced ergonomic front and
rear handles which provide enhanced
operator control and aid safety.
• Optimum weight balance between the
front and rear handles promotes comfort
and reduces operator fatigue.
• Front and rear handles electrically
insulated from the machines metal parts.
• Dust extraction capability.
• Quality rubber sheathed power cable.
• Reinforced Steel Skid Plate.
• Removable wheeled undercarriage.
• Multi-purpose adjustment tool
• On board Tool Storage
• Replaceable motor brushes
Note: Where necessary machine specific
features are referred to throughout this
Manual.
BLADE FLANGES
USA: Machines destined for the USA
market are supplied with blade flanges
which accommodate blades with an arbor
hole of Ø 25.4mm (Ø 1") for 12" blades, and
ø22.2 (ø7/8") arbor hole for 9 & 10" blades.
OTHER MARKETS: Other machines
are supplied with blade flanges that
can accommodate blades with either a
ø20mm (ø3/4") or ø22.2 (ø7/8") arbor hole
depending upon how the flanges are
installed.
www.evolutionpowertools.com
14