Residual Risks - Evolution R230DCT Instrucciones Originales

www.evolutionpowertools.com
INTENDED USE OF THIS POWER TOOL
This machine and has been designed to
used with Evolution blades. Only use accessories
designed for use with this machine and/or those
recommended specifically by Evolution Power
Tools Ltd.
When fitted with an appropriate blade this
machine can be used to cut:
Brick
Paving
Kerb Stones
Concrete and related construction materials
Steel
Non-Ferrous metals
Natural Stone
PROHIBITED USE OF THIS POWER TOOL
WARNING: This product is a Hand Operated
Concrete Saw and must only be used as such.
It must not be modified in any way, or used to
power any other equipment or drive any other
accessories other than those mentioned in this
Instruction Manual.
WARNING: This machine must not be used to
cut any material that may contain asbestos. If the
presence of asbestos is suspected, consult the
relevant authorities for advice.
WARNING: This machine is not intended for use
by persons (including children) with reduced
physical, sensory or mental capabilities. Potential
operators who lack experience concerning the
use of this equipment should be given training
and be supervised by a competent person who
is fully conversant with the working practices
necessary to use this equipment safely.
Children should be supervised to ensure that
they do not have access to, and are not allowed
to play with this machine.

RESIDUAL RISKS

Even if the machine is used & maintained
correctly, there are still residual risks that could
cause serious injury. Due to the type and nature
of this machine, the following potential hazards
can occur:
• Contact with the exposed blade (cut)
• Reaching into the rotating blade (cut)
• Parts of the blade being thrown from the
machine (cut or blunt injury)
• Parts of the workpiece being thrown from
the cut (cut or blunt injury)
• Risk of fire from flying sparks
• Damage to hearing if effective hearing
protection is not worn (hearing loss)
• Inhalation of dust particles from the
workpiece
• Electric shock when touching uninsulated
be electrical components.
If the instructions contained in this manual are
not followed, other residual risks may arise due to
improper use.
ELECTRICAL SAFETY
This machine is fitted with the correct moulded
plug and mains lead for the designated market.
If the supply cord of this power tool is damaged,
it must be replaced by a specially prepared cord
available through the service organisation.
The plug, if damaged, should only be replaced
with genuine Evolution replacement parts and
be fitted by a competent technician.
(2.1) GENERAL POWER TOOL
SAFETY INSTRUCTIONS
(These General Power Tool Safety Instructions are
as specified in EN 60745-1: 2009+A11: 2010)
WARNING: Read all safety warnings and
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for
future reference. The term "power tool" in the
warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power
tool.
(2.2) 1) General Power Tool Safety Warnings
[Work area safety]
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gasses or dust.
Power tools create sparks which may ignite the
dust or fumes.
c) Keep children and bystanders away while
operating power tool. Distractions can cause
you to lose control.
(2.3) 2) General Power Tool Safety Warnings
[Electrical Safety]
a) Power tool plugs must match the outlet.
Never modify the plug in any way.
Do not use any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs and matching outlets will
reduce the risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is
an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
5
EN