Yamaha NX-B150 Manual De Instrucciones página 13

Playing music via a Bluetooth connection
On
(white)
Play
Press p (power) to turn on this unit.
1
If the most recently connected device is available, it connects to this
unit automatically. In such a case, proceed to step 3.
2
Operate the connection device paired with this unit to
establish a Bluetooth connection.
When a connection establishes,
3
Play music on the connection device.
4
Adjust the volume using –/+ (volume) on this unit.
Disabling the Bluetooth connection
Follow one of the procedures below to disable the
(A) Press
(B) Press p (power) to turn off this unit.
(C) Disable the Bluetooth function on the connection device.
Switching the Bluetooth connection
Only 1 device can connect to this unit at once. Disconnect the current
connect to this unit to establish a new connection.
Deleting all the pairing information
This operation deletes all the pairing information from this unit.
1
2
( ) lights blue.
Bluetooth connection and music playback
(Bluetooth) to turn off the indicator.
connection, and then operate the
Press p (power) to turn on this unit.
Press and hold (Bluetooth) for about 10 seconds.
( ) will flash quickly and all the pairing information will
be deleted.
connection.
device you want to
13
En