ASROCK X79 Extreme11 Manual Del Usuario página 45

2.13 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
Serial ATA2 Connectors
(SATA2_0_1: see p.2, No. 18)
(SATA2_2_3: see p.2, No. 19)
Serial ATA3 Connectors
(SATA3_0_1: see p.2, No. 17)
SAS/Serial ATA3 Connectors
(SAS_0_1: see p.2, No. 20)
(SAS_2_3: see p.2, No. 21)
(SAS_4_5: see p.2, No. 22)
(SAS_6_7: see p.2, No. 23)
X79 Extreme11 Motherboard
These four Serial ATA2 (SATA2)
connectors support SATA data
cables for internal storage
devices. The current SATA2
interface allows up to 3.0 Gb/s
data transfer rate.
These two Serial ATA3 (SATA3)
connectors support SATA data
cables for internal storage
devices. The current SATA3
interface allows up to 6.0 Gb/s
data transfer rate.
These eight SAS/Serial ATA3
(SATA3) connectors support
SAS/SATA data cables for
internal storage devices. The
current SAS/SATA3 interface
allows up to 6.0 Gb/s data
transfer rate. We recommend
®
using Intel X79 SATA2 ports
instead of SAS ports for your
ODDs. For connecting SAS
HDDs, please contact SAS data
cable dealers.
45